Location: Home > Computers > Components > Cooling Fans/Heat Sinks > Rosewill RCX-Z1 Long life ball bearing for over 45,000/hrs CPU Cooler

Rosewill RCX-Z1 Long life ball bearing for over 45,000/hrs CPU Cooler

  Store Product Price  

Online
Rosewill RCX-Z1 92mm Ball CPU Cooler
Newegg.ca - Once you know, you Newegg! 
$14.99 CAD Buy Now

What is on Ebay

  End Time Product Price  
Rosewill RCX-Z1 CPU Cooler - Ball bearing for over 45000/hrs - 92mm fan size Rosewill RCX-Z1 CPU Cooler - Ball bearing for over 45000/hrs - 92mm fan size $23.77 CAD Shop Now
Rosewill RCX-Z1 Long Life Ball Bearing For Over 45,000/hrs CPU Cooler Rosewill RCX-Z1 Long Life Ball Bearing For Over 45,000/hrs CPU Cooler $28.76 CAD Shop Now
Rosewill RCX-Z1 Long life ball bearing for over 45,000/hrs CPU Cooler Rosewill RCX-Z1 Long life ball bearing for over 45,000/hrs CPU Cooler $52.76 CAD Shop Now

Product Reviews

Rosewill RCX-Z1 Long life ball bearing for over 45,000/hrs CPU Cooler
73%
Excellent
19%
Very Good
4%
Average
2%
Below Average
2%
Poor
Rating: 9.17/10
Leslie
Rating:

Review Date: 09/15/13
Comment:
1) Low Price (less than a pair of movie tickets...:Ɯ) Substantial Fan & Cooling Surface3) Effortless Mountingfour) Wide Clearance at Basefive) Fan Controller Option6) Fan Mounted Wire Guard (that really functions!ơ) Pre-Applied Thermal Paste for Convenience 1) Pre-Applied Thermal Paste is OEM Excellenttwo) 3 Ɠ) Pin Fan Connector, not 4 Ɣ) pin I'm running this HSF on an AMD Phenom II x3 740BE at three.0ghz and 95 watts. My mainboard is a Gigabyte GA-M57SLI-S4 with all the RAM banks populated.With the low grade OEM paste and higher ambient space temperatures I am obtaining 36c Idle and 48c Load temps. This is quite excellent, particularly after operating a toaster oven cpu 񣎀+ x2 Windsor ) for fairly a when. If I had utilized Arctic Silver I'm constructive my temps would be even lower, but I am incredibly satisfied with the temps as they stand.An critical consideration for me was base clearance simply because my Gigabyte GA-M57SLI-S4 mainboard has tall capacitors close to the cpu socket. The Rosewill RCX-Z1 style leaves a lot of area around the socket and very easily clears my capacitors and memory banks.I am really pleased with the efficiency of this heatsink and fan. I can hugely recommend this device to anybody needing a low price, moderately performing heatsink for a 95 watt TDP chip. Of course, if you don't know what you're carrying out, no device will support...:)
Tobit
Rating:

Review Date: 08/30/13
Comment:
I applied this heat sink and fan for more than a year and a half with an Athlon 5200+ Then when I upgraded my motherboard I utilised this HS&F with My new Athlon2 x4 630 and it kept it at a very cool 23c idle and even at one hundred% on all 4 cores by no means went above 35c. The large copper base plate leaves nothing to guess at when mounting and is great an very effortless to mount. Not actually a con per say, But it could use a 4 pin plug. The fan did ultimately give out right after more than years of continuous use and they were out of stock on Newegg, the one I did acquire does the job but I am purchasing this for my subsequent construct even although it isn't technically rated for an Athlon two CPU's
Thaddeus
Rating:

Review Date: 08/27/13
Comment:
Great cooling for the low price tag. I have a 7750BE and the stock cooler is just junk threw it proper away. and bought this. It took about 2 days to burn in and for the temps to settle down. Now Im running around 36-39c Idle and it never ever goes above 46c on full load. Bang for the Buck!!! The Fan that came with it is fairly but dosnt push enough air and it only has a 3pin connector. I replaced it with an additional fan (a bit much more loud) and it has a 4pin CPU connector. So I ended up just employing the Fan Controller Knob for my rear out-take fan, performs effectively. Good Bang fo rhte Buck for Sure. NOT Very good FOR OVERCLOCKING
Benito
Rating:

Review Date: 07/27/13
Comment:
Considerably much better than anticipated, the fan was quiet and opperated smoothly none runs cool, amd southbridge runs hotter than the cpu, 3800 x2 temps dont exceed 28 degrees cel.
Leola
Rating:

Review Date: 07/22/13
Comment:
Not outstanding in any way. A lot Too loud on full setting. With the fan controller, the speeds are not rapid enough to be powerful. Fan controller doesn't perform if only plugged into the MB pins, it wants a four pin molex to work, and then the speed is not impressive, but the fan is silent then. Stock AMD fan ranged from 30 to 55. This ranges from 29 to 50 cel. So there is actually no advantage from this.
Nodin
Rating:

Review Date: 07/19/13
Comment:
My stock AMD cooler was just not cutting it any longer. I just required a good smaller basic cooler and this does the job. It's a tad bigger than the stock cooler, but it fits into my little, mini-atx, (Cooler Master Elite 360) case just fine. I'm not exactly utilizing this laptop for gaming or 3d modelling or anything. On my Phenom II 550 it's running at about 30 idle and doesn't get above 40 on standard load. I'm not gaming or something, so it does the job effectively, and for only ฟ, I can't complain. N/A
Pisces
Rating:

Review Date: 07/17/13
Comment:
Substantially far better airflow than the stock 939 cooler, copper base helps a lot. A fan speed controller is good. None so far. The price tag isn't a lot more than a stock AMD HS&F, but the performance distinction is huge. My A64 X2 was acquiring so hot it would make the mb shut down, even with a moderate upgrade. The copper base tends to make all the difference. I have to run the fan at full speed but now it tops out at about 50C instead of 80-90.Following finding a totally free C2D of the exact same specs I'll never go back to AMD. I loved the cost but the C2D runs more rapidly and so substantially cooler I'll be acquiring older Intels and receiving the very same functionality in a CPU. I nevertheless favor ATI graphics cards although.
Bonita
Rating:

Review Date: 07/09/13
Comment:
It lasted me almost a whole year...very good heatsink incredibly reputable... none
Earl
Rating:

Review Date: 06/25/13
Comment:
InexpensiveVery QuietAdore the Fan control tuningSubstantial Doesn't truly keep cpu that cool .. but don't mind .. I largely purchased this to hold the pc running quiet . . considering that my stock cooler was running genuinely loud Was very difficult to install .... took me, My Lil bro & my Dad 2 hrs to get it fastened on the MOBO
Jan
Rating:

Review Date: 06/18/13
Comment:
Extremely inexpensive. Truly like the adjustable handle slot. Dig the Red blades. Extremely effortless install Not actually a con but would be nice if this model came with at least 1 LED, would truly trick out the red blades. Also wouldnt mind seeing a version with front mountable fan controls.
Calais
Rating:

Review Date: 06/11/13
Comment:
beats the ac pro has a fan controller that comes with it. so if its as well load turn it downamd two.five 7550 runing at 21c ide 38 loaded at low speed WOWhas a good fan guard on it for a 3500 rpm fanprice!!copper connectionthe thermal paste comes on it is excellent stuff࿃c)added some ac mx two droped to 21c the fan controller has lots of wiring thats require to be maintenance(get some zip ties) great cooler fantastic price get it !!
Naresh
Rating:

Review Date: 06/09/13
Comment:
Appears to operate fine, keeps cpu cool. My consumer is pleased with it. Could have cool searching led Great for a standard Phenom 9850 but I wouldn't oc with it
Fola
Rating:

Review Date: 06/06/13
Comment:
If everyone is looking for a decent CPU heasink/fan for a good value, this need to be it. I am at present operating an Athlon II X4 630 at 95 Watts and this cooler does its job amazingly. I like the copper heatsink and fan controller as nicely!AMD stock heatsink/fan = 50°C idleኝ°C complete loadRosewill RCX-Z1 = 28°C idleኌ°C complete loadThat is a Massive improvement over the stock AMD heatsink/fan. Because the fan is also a 92mm, it's extremely quiet compared to an 80mm fan running at full load.The overall create of this heatsink/fan looks incredibly sturdy. I am extremely impressed and will obtain an additional a single for my subsequent construct. The fan controller is a tiny flimsy following installing at 1 of my PCI slots, but it still does its job completely, which is to handle the RPM of the fan. If everyone was questioning if this will fit in an AM3 motherboard, then the answer is yes it will fit in an AM3 or AM2+ socket on a motherboard.
Zuri
Rating:

Review Date: 06/03/13
Comment:
Have purchased five heatsinks more than the course of four+ years, and not one has let me down. drops cpu temp ӯ+ degrees C over stock at idle. load drops ӱ-ten* C. not arctic silver preapplied, but then i've by no means observed an improvement working with arctic silver over preapplied with these.
Joyceta
Rating:

Review Date: 05/29/13
Comment:
Really low-cost (eight bucks when I got it). Incorporated fan controller (not using it). Compatible with socket AM3. Rosewill is forthcoming with consumer help. Excellent copper and aluminum construction. At equivalent RPM's, it is not as quiet as the AC Freezer 64 that I had to replace because it was also big for my HTPC case. Also, it doesn't make me espresso. MEDIA BOX:GIGABYTE GA-MA770T-UD3PAMD Phenom II X3 720 @ 3300Mhz Ƒ.36v, 50 passes Linpack steady, 25C idle / 45C load with RCX-Z1 cooler and arct1c s1lver five thermal compound)mushkin HP 2 x 2GB DDR3 1600 996659 (currently at 1333 till I max out the processor clocking)MSI N9600GT-MD1G GeForce 9600 GT 1GB (no PCIE energy essential!ꊨGB WD BLACKPc Energy & Cooling Silencer PPCS500 (single 12v rail @ 35A)COOLER MASTER Elite 360 RC-360-KKN1-GP ATX Mini Tower2 x 120mm Enermax Cluster fans for cooling (not worth it, stick with the Scythe SFLEX fans)
Keeya
Rating:

Review Date: 05/27/13
Comment:
runs silent on the lower settingperforms like it ought to, keeps my CPU at 27c idleunder 50c in the course of gaming at its lowest settings does get loud at mid-greater settings, but operates so nicely that unless you OC over the top you wont need to have to use those settingsawful cable management if you set up the knob control, grab some zip ties if they produced this with a 4pin or had better cable management, 5 stars straightforward!
Zoie
Rating:

Review Date: 05/18/13
Comment:
- Fan manage that can be mounted in the rear which is fantastic.- Packaging was good quality, item was fully intact and and not sent in a crushed/broken tiny box you may well discover from a super discount shop. Also came with a manual and the fan dial was even packaged in its personal box lol.- Powerful, the fan has a dial that goes from low to higher, enabling you to compensate noise over raw energy of cooling.- Quality heatsink and high quality fan. You could feel and also see it was made to final. I'm quite delighted with my acquire. If there is any low cost CPU cooler you need for AM2 or AM3, I Very propose this cooler, as it does the job perfectly. None what so ever. Mounted it on my 5600+ AMD Dual core, Keeps it nice and cool at about 30 C. ( This Pc I sold to my pal.)No problems so far.
Reina
Rating:

Review Date: 05/18/13
Comment:
Not as loud as i though it would be. The cooler handle tends to make it convenient when adjusting the temp. I overclocked my AMD 5400+ Oc'd to two.9 from two.7. AND i got it for eight bucks! My wife hates it! So i have it operating about two.4k instead of three.0k, and my cpu nevertheless runs cool at 40c.
Nolen
Rating:

Review Date: 04/27/13
Comment:
Now, this may seriously be preference, but it seems to run extremely silently. Myself, personally, I would rather hear the fan functioning and give up silence for efficiency. This fan, however, adjusts itself its speed on cycles so that it runs quick and "louder" (not loud) with more functionality, to slowly and silent when not necessary. Extremely "smart" fan! The temperature will fluctuate, which could not often be preferred. Nevertheless, if this isn't to your taste you can basically modify it in BIOS, (or possibly not basically for some :P). Also, for some it could run slightly loud at occasions during its cycle but isn't quite loud in my tiny metalic case. It is easily adjusted for personal preference and keeps the pc really cool. It saves energy by adjusting fan speed with the adjusting temperature. It comes with a controller to adjust fan speed manually... but its on the back of the case... exactly where you can't usually get to... which ought to be a con, but seeing as how it does not impact the performance of the fan itself, I won't take into account it as one particular. Right after each and every 14 degrees of increasing temperature, it kicks in and cools it down 13 - 16 degrees. So, with mine... it goes from 85 to 99 and goes back down to 83 - 85 (depending on workload). General, wonderful fan!
Malissa
Rating:

Review Date: 04/21/13
Comment:
Does a good job. It keeps my cpu in the low range. Every year or two it have to be clean, dust will clog the vanes, stopping the air flow. I use a needle to pull all the bunnies out.
Fuller
Rating:

Review Date: 04/20/13
Comment:
1. Inexpensive ᤎ.99two. Productive Idle 26C Load 45C stock AMD 4253. Effortless Set up on AM3 CPU If there is a con, it would be fan noise, but I have no comparison. Bought to cool an OEM CPU.
Sumitra
Rating:

Review Date: 03/19/13
Comment:
I had this heatsink for over 2 years now and it has been functioning fantastic ever since. I got my Phenom II X2 overclocked to 3.7ghz on this point with temperatures operating about 45-50C underload. Good top quality heatsink for a low price. Extremely propose if you want a cheap high top quality solution. It's not actually a con, but far more of a personally challenge. The CPUf fan controller is excellent and all if you want the fan to run quieter, but all of the wires is just a massive ol mess to me. Positive I could just tie them down but it still looks messy in the case.
Altsoba
Rating:

Review Date: 03/19/13
Comment:
Temps are 33 degrees below load, the fan controller is a must to set up, otherwise the fan will run at 3K RPM, which is too loud. This only has a three pin adapter, most people will want a 4 pin adapter, but I didn't notice that initially. The 1st motherboard that I put this into, the CPU ran hot, and I left an unspectcular evaluation. But, it was a low end board, which may possibly have been portion of the problem. I bought a second MB, and the CPU runs with low operating temps, as talked about above. Suitable now it is at 30 degress. I didn't use any particular paste either.
Porsche
Rating:

Review Date: 03/04/13
Comment:
Just installed nowadays with my brothers very first develop and it seems like its carrying out a great job. The dial for the low speed and high speed works as properly. I read on some of these critiques that absolutely everyone got dead ones, but mine worked flawlessly. The thermal grease appears alright, but overall I'd buy yet another rosewill item! none
Yo
Rating:

Review Date: 03/02/13
Comment:
fantastic cooler for a good price tag, new egg shipping is quickly . none just what I require for my HOT fx57
Click Here Show More Product Reviews

Product Features

Product Specifications

Model
Brand Rosewill
Model RCX-Z1
Spec
Type CPU Cooler
Fan Size 92mm
Compatibility AMD Athlon 64 FX (Socket 939, 940, AM2)
AMD Athlon 64 X2 (Socket 939, AM2)
AMD Athlon 64 (Socket 754, 939, AM2)
AMD Sempron (Socket 754, 939, AM2)
Bearing Type Ball
RPM 1700 - 3100 RPM
Air Flow 33 - 57.2 CFM
Noise Level 18 - 33.4 dBA
Power Connector 3 Pin
Color Red
Heatsink Material Anodizing For Aluminum Alloy with huge dimension copper base.
Physical Spec
Fan Dimensions 92 x 92 x 25mm
Heatsink Dimensions 90 x 90 x 45mm
Features
Features 92mm silent cooler with cooler guard
Huge dimension copper base
Stick together power cable
Cooler controller included
Pure aluminum heatsink
Simple installation for AMD
Package Contents
Package Contents CPU Cooler
Cooler Speed Controller
Manufacturer Warranty
Parts 1 year limited
Labor 1 year limited
PriceBat.ca is 100% Canadian Own premier price comparison shopping site. Easy to search & compare prices of computer products, electronics and games at Canada online stores.