COOLER MASTER HAF 912 RC-912-KKN1 Black Computer Case

Comment:
What can i say about this case. 60 bucks is an absolute steal for a case of this caliber. Extremely sharp seeking, in particular with two 200mm fans glowing red on the front and leading (not supplied.)Very good room for hardware and cable management. Could be a little far more room on the back side for cables, but current space it sufficient. Any person with a GPU on the lengthy side will have no issues, as the middle HD cage is removable. Comes equipped with an SSD mounting remedy witch is quite good. Single tool-less optical drive slot is sufficient. Several HD mountings are a breeze. Cleaning is very effortless with the dust filters. Rubber feet maintain the case secure and slightly elevated for bottom mounted PSU fans. Haven't found any yet! Fan set up as such. Intake- front 200m, side panel 140mmExhaust- Best 200mm, rear OR 120mm.This supplies exceptional airflow and keeps everything running cool. The 200mm fans are a huge plus for airflow and silence.Very pleased with my HAF-912.

Comment:
I have used this case for more than 1 year, and had a lot of hardware upgrades, all the pannels are solid, no bending at all.for this price range, this is the best case in NCIX :)

Comment:
roomiest case in its class-truly appreciate the extra width and length when cramming 7 drives and raid cables into it. excellent cooling with two front 120mm fans and several top and side panel fan options 1. drive cage air flow-the cage could be far more open in the airflow direction to get additional air across the drivestwo. drive cage position-the case is plenty wide, which is appreciated. not positive why they centered the bottom drive cage, as this leaves barely sufficient space, and if you are utilizing a sas controller multi-channel breakout cable there is not sufficient space. I moved the cage to the far right side and have tons of room for the drive cables-wish they would have done this from the factory-offset to either side to leave space on the other for cablesthree. fit and finish-not really as excellent as a different brand (think massive name that sales situations, fans and power supplies) comparing to that other brand, the mainboard fit in the system is not as great/expansion cards don't line up as nicely. included systemboard screws don't have washered heads to ground nicely to your board and the included standoffs are fine thread-I thought every person had moved to course thread years ago for those. looks fantastic, very good worth, adore the 1+ inch wider than others in its class. if not for the couple of complaints it would be my favored case. as it is, it's about the identical as as the other major brand name in this size and price range

Comment:
If u want style go with something more expencive.

Comment:
This is a sweet case with alot of vulnerability, specifically with the cooling...Here are some temps with my I5-2500k....Prime 95 operating࿘c(cpu temp) all fans operatingidle with no load ࿃c(cpu temp) all fans runningall temps with HWmonitor and a Zalman 9700 cooler Inside isnt black but a can of spray paint could fix that if it bothers you... I5-2500k16gb Gskill ripsaw 1600pcpowercooling 910w psuEvga GTX 560TI scWin pro 64Haf 912 with 5 fansƑ 200mm best, four 120mm front,back,sideMSI p67a-GD65 B3Asus VE247HZalman 9700 cpu cooler with artic silver 5WD black 750gd hdd six.0gbs

Comment:
Lots of room for components and a lot of cable holes to run cables about the motherboard plate to help airflow and lessen clutter.Decent quality and not too heavy. Only comes with two fans installed but put in the 120 mm 4 in 1 pack from CM; I kept fan fees in thoughts whilst searching at this case and it's larger brothers.Shorter brass mounts for the motherboard; didn't notice this until immediately after putting factors in...No screen on the side fan vent; the acoustic profile of this vent is horrible and triggered my 120 mm to whine. It was how the honeycombs are shaped and not the fan. I cut out some pantyhose and use that to eradicate the noise and as a dust cover.Only one tool much less 5.25 mounting device; flimsy at that. I applied screws to put in my optical drives so they make much less noise when they spin media.Affordable thumbscrews and only on one side panel.Metal feels sub-par compared to the Antec tower I'm "upgrading" from. Keep in thoughts the cost of putting in extra fans and/or replacing the current fans will inflate the cost. The 922 may possibly be a much better deal considering that it only needs 1 further fan and has additional airflow even with no that fan.

Comment:
This case is awesome. It is the best case you can get at this price. Do a quick search for PM if you can, maybe save a dollar or two. Purchase the coolermaster 200 mm fans for the front and top for about $20 more.What can I say about this case? great airflow, smartly designed, comes stock with some nice fans, plenty of space for cable management, includes zip-ties for cable management, it's just a dream to work with. CPU mounting bracket rear window, so you don't have to take the whole thing apart to mount a new cpu cooler.It's just great, all the way around it is awesome.Only complaint is that the (lacking) directions show that to remove the front faceplate you only have to unclip three clips, when in reality it is three on each side. C'est la vie...At this Price Point, it is amazingly the best case you can buy. Believe me, you will not regret this purchase.

Comment:
This case is best size for my parts. Operating an AMD chip 3.two quadcore with a good fan and a Nvidia 470gtx card and this case still has so considerably room!! Didn't like not getting the fans that it should come with it. Only got 2 of the 120 mm fans which is good but it is not adequate to cool down my video card or push out heat. Left the side case off it until fans are bought.

Comment:
perfect shell if you want to build a great gaming machine! my buddy got his haf, and once i saw it, i wanted it! doesn't have to have a cooling system, but i sure as hell plan on getting one!

Comment:
Bought this case because I was on a budget. I have no regret, it was easy to work inside of it, not like most cases where my hands are covered in blood after about 10 minutes. (Damn my nord hands) This case was a breeze to setup, all the wires came nicely labelled and the screws, tie wraps, and drive rails came nicely packaged. All in all this case was a good buy, I would reccomend it to anyone who is on a budget or who just wants a solid case for the 45-70 dollar price range,

Comment:
I just opened the box and wow, I don't think anybody would be disappointed. Sturdy build and looks very nice. I was going after $200+ tower but I have not regret getting this at all. Greatest bang for your buck!

Comment:
I adore the look, my fan control system which sits in 1 of the front bays has the precise same black mesh look, a lot of space for almost everything and additional, excellent fan placement, many storage alternatives and awesome wire management. The value. I wish they would of made it just another quarter to half inch longer, then I wouldn't have necessary to remove the hidden HD cage to fit in my two XFX HD6950's. But I still have one front bay and yet another SSD cage for tough drive expansions. I adore the appear and it meets my needs so that's all that matters. Either you enjoy the appear or you don't.

Comment:
This case was everything i was expecting. It is a very good first case for anyone out there who has not built a computer yet. Mostly metal casing makes it very durable. Also for the price, this is the best you can get.

Comment:
Amazing case, really like the side loading Hard Disk slots, decent price, decent size mid tower ATX A small bulky, but I still love it.

Comment:
This is the 2nd case I have owned from Cooler Master and only one of numerous merchandise that I have bought from them. This case has exceptional air-flow and fan mounting capabilities. Its looks are really appealing and it has excellent cable routing. Mounting drives was easy but I only wish it had a few much more toolless drive bays. On the other hand, I am only working with one 5.25" bay now anyway. The only difficulty I have run into so far was a broken tab I discovered in the bottom of the case upon opening it. Traced it down to a tab on the proper side that locks into location the usb/audio panel on the best of the case. The panel moves out of place a small now when plugging in my gaming headset or flash drives. Not a hughe deal but 1 of those small annoying issues I would have thought they would catch at Cooler Master good quality control. That is the reason for the 4 eggs. Otherwise, an awesome case. My build:*ASRock Extreme three 870*AMD Phenom II X4 965 BE OC to three.9GHz*Cooler Master HAF 912*Antec TruePower New TP-750 750WƦ Western Digital Caviar Black WD1001FALS 1TB 7200 RPM 32MB Cache SATA 3.0Gb/s three.5"*PNY XLR8 VCGGTX4601XPB-OC GeForce GTX 460 (Fermi) OC 1GB 256-bit GDDR5*G.SKILL Ripjaws Series 8GB ƒ x 4GB) 240-Pin DDR3 SDRAM DDR3 1333Lite-On iHAS124Cooler Master Hyper 212+ Heatsink/Fan

Comment:
1st thing, its a spending budget case. Its amazing, this case has every little thing I wanted in a case and is so affordable. I can hide my wires in the back. Has sufficient Hard Drive space, and is so roomy. I appreciate the front panel connections.This can fit any sort of method you put in it. This isn't adequate to lose an Egg, but I dislike the space they give you behind the motherboard tray to hid your wires. I had to pull a TJ Harlow. I had to turn the case on its side, and sit on leading of the case to put the back panel on. Thank you for the outward side panel that they put on the right side of the case, because my Corsair H50 water lines bend outside of the case, and if it wasn't for that outward room on the correct panel those lines would of been pushed in. But there isn't sufficient room for a Corsair H50 to be effectively fit. The radiator is installed on the back fan slot, so it takes up the space to install a second fan on best of the case.If you power supply doesn't have 90 degree angle Sata Cables then it will be challenging to install your SATA cables frontward so you can see them. But its okay to install them in backward in the case to hide the wires. Every little thing is amazing. The case doesn't vibrate with every thing I have installed. I don't have to worry about anything within the program since I have a Radeon 5770 so its not to long to get rid of the Difficult Drive cage.

Comment:
For the price, you honestly can't go wrong with this case. No flashy lights, no acrylic side panel, just what you need. Has the usual assortment of front panel audio and 2 front USB 2.0 slots, which is much appreciated.Would definitely buy again if I was building another computer.

Comment:
Spacious - Effortless to function with.. opened the case suitable up with no difficulties. Some factors take a little prevalent sense so if you found this case complicated to function with... naturally you don't have prevalent sense. None. AMD Phenom II X4 955 BECorsair 650W PS8GB G.Skill Ripjaws ƒx4GB)Asus MoBoEVGA GTX 460 SE 1GBWD Caviar Black 500GB HDDAsus DVD/RW Windows 7 Premium 64 Bit

Comment:
I really like this case. You get an attractive looking, easy to work in case for around $50. Hard to beat that. It has some toolless screws included which are used for the side panel with the fan on it which allows you to quickly get at the inside whenever you need to. I wish they include more toolless screws but I assume that would be the case in their higher end cases. The HAF 912 has a toolless design where you can easily pop in and out your hard drives and media drives in a matter of seconds. I never had this feature before but after experiencing it I will never go back to cheaper, less featured cases. The HAF 912 includes some fans but I recommend you replace them with nice LED type fans (I have the CM Megaflows with red LED) as it makes the case look outstanding as the meshed front and the top panel really brings out the LEDs in a very nice way. The included fans may be of good quality (can't confirm this) but I just had no use for them. The HAF 912 has some negatives despite being a very good case. I found the paint scratched off easily when I moved it for just a short few seconds on a ceramic floor. I wish it had a coating of sorts to protect it but clearly it does not. The HAF 912 also has flawed support in the bottom of the case for the PSU as it is supposed to elevate it but the things put there are not solid plastic but rubber and break apart easily possibly leaving you with no way to elevate the drive. They should have been made of molded pastic or more solid rubber and have been secured to the case in a better fashion. The bottom line with HAF 912 .... I would buy it again at this price point.

Comment:
This has been one of the best cases I have ever purchased. I'm very much liking how easy it was to setup. It comes with quite a bit of extras as well such as a 2.5inch harddrive bay and quite a few harddrive bays. It also has an easy lock mechanism for the CD drive

Comment:
Qulity is Great.Quite large for a mid-tower case. Has lots of space for cooling. Solid build. Will purchase again

Comment:
Incredibly nice case for the price, my very first PC build went fine, was even able to put the cables away neatly in this case, lot of space for 60 bucks None

Comment:
I am incredibly content with this case. Superb ventilation. Many vents for additional fans. Everything you could possibly want to mount your motherboard/parts. Simple access inside (thumbscrews included). Lots of room for upgrades. A lot of spare parts (screws, mic, and so on). Absolutely nothing bad to say so far which is saying a lot considering that I adore to complain about the smallest issues. For the price of this case, it won't be straightforward to come across a greater deal. If you are on a budget and want a new mid case, this is the way to go. You will not be disappointed.

Comment:
This case is amazing... nice thumb screws for easy access to work on your computer. Many expansion slots for your SSD's or HDD's which by the way are extremely easy to mount.To top it off it has many spots for fans which all come with screens to help keep the case/your computer really clean and a nice spot for the PSU.even if this is the lowest of the HAF series it is still really great. I would Highly Recommended this case to anyone wanting to build a gaming rig that is on a budget!!!

Comment:
For it's price you get awesome value.