COOLER MASTER RR-LEE-L911-GP 92mm Sleeve X Dream 4 CPU Cooler

Comment:
None at all. This heatsink is just all about terrible, the plastic small clips for or what ever suck and dont function, i have to lay my pc on its side getting the heatsink/fan ontop of the processor so it doesnt more than heat, and occasionally nonetheless can if i'm playing a game for to lengthy or a thing, I WOULD NOT recommend this product I'm operating a Intel Pentium D 3. Ghz and with a normal area temperature, its about 45 C, and it goes up to 60 C now when i'm play Warhammeronline, please invest a tiny additional income as opposed to me and get a fantastic item.

Comment:
It's far better than practically nothing, i.e. if you don't already have a heatsink/fan to put on your processor or if you want a replacement; it's cheap. - The fan is just as noisy, no a lot more, no significantly less, than the stock Celeron fan, only alternatively of a purr it's far more of a whine- Its plastic pin fastening technique puts undue strain on the motherboard and is painful to your fingers in the course of the installation procedure. Do NOT purchase this as an upgrade. You will be disappointed. If you're hunting to develop a HTPC or ultra-quiet workplace server, just appear for a fanless cooler of some sort. You get what you spend for, I guess.If you have to obtain and set up it, you would do properly to 1st remove almost everything else from your case, due to the fact you will need to have area to do the 2-finger dance necessary to push the pins down and make the heatsink snap in place.Also, the solid face of the heatsink that is in get in touch with with the processor is smaller sized than the processor itself. I don't know how this affects heat flow, but it's possibly worth mentioning.

Comment:
installed effortless, kept my celeron 430 cool louder than the stock cpu that came with the celeron...i bought this for an HTPC, and it was the loudest component of the personal computer. returning it due to the noise.

Comment:
Cools cpu fairly well, as it need to. Practically nothing extraordinary even though. Mounting program sucks. The plastic pin system doesnt function also nicely. I had to push so challenging on them i was afraid i was gonna break my board. Does what its supposed to. The only point im unhappy about was the hassle trying to get it on there. On the other hand Unlike other critiques say.. after i ultimately got it on there, its relatively sturdy

Comment:
Was quiet at 1st. Fan bearings gave out right after about six-eight months of pretty continual use. There is no excuse for any business to use fans with low-cost bearings in right now's world! I picked one of these up locally when I damaged the low cost plastic mounts on the stock Intel fan as I was removing it to clean a method. Same low-cost mounts on this one particular, but at least the fan can be replaced quickly. No much more Cooler Master products for me! Too numerous disappointments. Manufacturer Response:Dear Valued Buyer - We sincerely apologize for any difficulty. Please make confident that the fan is kept moderately cleaned. If the fan is clogged with dust and not appropriately maintained, it may possibly result in difficulty such as the type you are obtaining. If this is not the case, we can get the cpu cooler replaced below warranty by means of the eRMA link under. If you have any other queries, please get in touch with us by means of the Live Chat hyperlink under. Respectfully - CMUSA Buyer Help.External Link(s): Live Chat| eRMA|

Comment:
low cost Absolutely not what I was expecting from cooler master. The excellent even for a spending budget cooler did not meet my expectations. It appears nice in look, but the speak to patch is quite rough. I also did not like the push and twist clips. They seem really cheaply produced. Only marginally superior than a stock cooler.

Comment:
Easy installation and surely match. Properly built. Just a bit loud, BUT a lot decrease than my old fan. Good deal.

Comment:
There is nothing wrong with this cooler. Read first sentence once more. It's so a lot quieter than the stock fan from Intel, cools wonderful. I think other reviewers have not installed the cooler appropriately. Should be great for mild overclocking also. none I am going to order one more one.

Comment:
Nevertheless operating quietly immediately after a year, keeps my server running cool none

Comment:
Stock cooling device with my Core2Quad 6700 Turned my computer on...20 minutes later, pc turns off...Returned my computer on, turned off right away.Checked inside my pc, and THIS cooling device was off...Tried to reconnect it...Startup degrees was 93 Degrees Celsius. I will have to now take my computer apart to attempt to get this issue to perform, or, i will have to acquire a new cpu fan (which i was arranging to do in the future, anyways)

Comment:
Low costperforms great little noisy

Comment:
does the job superior then the stock a single. much quieter then the stock one particular. had a difficulty installing it. the difficulty was that my stock head sink was scrod onto the mb. so i had to take out the motherboard and take away the metal plate on which my stock head sink was scrod onto.

Comment:
It functions devoid of a issue so far. It's keeping the processor I put it on at a good 27C. It's extremely cheap! It's a small louder then I was expecting. But not by considerably. As extended as you know how to put a push pin cooler in, this is simple as it gets. I honestly favor screws, but the push pins operate just as well and are virtually as effortless to install. As extended as you do it appropriately you won't really feel like you are going to break your motherboard. Adhere to the diagram on what way the pins are supposed to face just before you push them. It's easy. (You'll hear a modest click) ;)

Comment:
Cools nearly as effectively as stock if the personal computer is lying flat. Underperforms the stock fan, too heavy for its 3rd rate push pins (it pops out/is too loose if the pc is upright), loud & rattly.Just get decent thermal paste and you'll cool your CPU way additional than this could ever hope to. Bought it when I realized I required a lot more thermal paste. 3 bad mobos (Foxconn g31mv-k, quickly returned, thanks newegg!) and the consequent popping in/out had removed the stock paste from my stock cooler, and my thermals have been awful. Went to a regional personal computer shop to get some paste, figured I'd get an additional fan while I was there, but this thing is awful. Possibly it was superior than whatever employed to be intel's stock fan, but it absolutely isn't any a lot more.

Comment:
This isn't so poor, I utilised it in a develop, and it cooled a pentium4 three.0ghz to 34 celcius. Incredibly happy, and not noisy. Got it at fry s for 17 bucks... i need to have gone with the egg. its great

Comment:
Cheap. Loud for HTPC build. I purchased this based on the affordable value and fairly low noise level. Sadly making use of this in a HTPC construct is annoyingly loud in an Antec HTPC case. If your motherboard supports cpu fan manage the fan may possibly be acceptable, however the cpu fan selections are restricted to a single speed: total-blast on. A variable switch built into the fan would do the trick.

Comment:
For the price it does the job. I have a Pentium D 3.0Ghz with this and keeps it relatively cool. The plastic snap-ons are kinda affordable... but so are the stock 1's. would not O/C with this.

Comment:
operates excellent none

Comment:
It performs fine. Not quite high priced. I can't believe a handful of folks essentially mentioned this fan is quiet. This CPU fan makes additional noise than a tough drive, cd/rom, and two case fans combined. It may possibly be ok in a computer system that requires much better cooling exactly where somebody would be willing to accept the noise level, but I constructed this for a quiet office computer. I will surely replace it with a far better resolution.

Comment:
Fantastic Cooling. Dropped temp 20 or so Degrees C' from the stock fan. equally as loud even though kinda loud. not terrible

Comment:
Affordable, Totally free Shipping, performs decently 3pin Connector, c'mon, even the intel stock coolers have four pin not truly slient but cant seriously tell since of my 2x 2900xt in CF, keeps my e8400 OC three.33ghz ᤧC idle, 54C on loadCPU: E8400 OC to 3.33ghzMobo: Rampage FormulaRAM: 2GB Corsair DominatorsGPU: 2x 2900xt CF (visiontek)Optical: LG DVD RomPSU: Antec Signature 850wattsCase: Lianli Pc 60FWB

Comment:
Expense; ease of use; lives up to my expectations. I use it to keep my E6550 awesome in my property server. None This is not some thing you throw on your q9550 and OC with. What it is, is a superior general cooler that’s simple to install and provides better than adequate cooling for most demands.

Comment:
It was quite simple to install.It cools the CPU quite nicely.Low cost. Noise level closer to about 30dbi. Nowhere close to the 17dbi claimed. Bought 4 of these soon after reading the evaluations. The reviewers who said how quiet these are have to have had one particular heck of a noisy cooler ahead of. Every 1 of mine had been louder than the Intel stock fan. Attempted these on 3 diverse mobos, two unique Intels and 1 Foxconn. I would not advocate these for a quiet modest workplace or as a replacement for the Intel cooler that is not defective. Manufacturer Response:Dear Valued Consumer - We apologize for any inconvenience. Speed and noise rely on the fan setting you have within the motherboard bios. Please make contact with your motherboard manufacturer to come across out how to adjust the cpu cooler speed. If you think the fan is faulty even though, you can contact us via the Reside Chat link beneath to troubleshoot the problem and get a replacement. Respectfully - CMUSA Buyer SupportExternal Link(s): Live Chat|

Comment:
Good price tag runs quiet. Compact design. Inexpensive Newegg need to have a image of the heatsink to show that it does not cover the CPU all the way.

Comment:
Far better then stock cooler Hard to set up, but that is how all these push pin coolers are like. Could under no circumstances get it completely installed appropriately, could only get two of the 4 push pins down into the board. Luckily I had this exact same cooler but with the bolt on backs from one more create that wasn't being employed. This is now in the trash and was a waste of complete funds. Manufacturer Response:Dear Valued Buyer,We apologize for any inconvenience. If you have difficulty installing any of our merchandise, you can speak to us for technical assistance by way of the Live chat hyperlink below. If the cooler is faulty, we can get it replaced beneath warranty via the ERMA link below.Respectfully,CMUSA Customer Support.External Link(s): Reside Chat| ERMA|