CORSAIR XMS3 6GB (3 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory

Comment:
Plugged in... worked - quite good. none

Comment:
Enabled XMP and away i wentDo oneself a favor and get this stuff Zero ASUS P6X58D Premiumi7 930CORSAIR XMS3 6GB Ɠ x 2GB) CMX6GX3M3A1600C9Seagate Barracuda 7200.12 ST31000528AS 1TBXFX HD-577A-ZNDC Radeon HD 5770 XXX EditionCORSAIR CMPSU-650TX 650WAntec 300 with 2 120mm Fans

Comment:
When given a lot of volts, its alright. It was a extremely good price at time of buy three+ months ago. I'm pleased for the people it worked for but that wasn't the situation for me. I'm at the moment working with yet another High Voltage Set from a different Manufacturer. The very same overnight cool boot failure that confirmed this stuff is undesirable didn't affect this set. Corsair has superior buyer assistance so that's why I talked about this as a pro. I will RMA to them and wish they'd send me 1.5v stuff even if it is less expensive to replace this greater price RAM (Keep the transform). If they don't and I get this stuff back, I'll sell it LOL! RAM likes to be more than volt-ed to remain stable. The user profile in the BIOS (Gigabyte UD3R "F6") configured the RAM as it was supposed to. Soon after 3 Weeks the minor complications began but I didn't mind slowing down the speed and adjusting the settings higher/slower. It crashed and corrupted files as I was backing them up. One of the sticks appears to be dead and operating 2 only worked at slower speeds, I'm thinking they may possibly be damaged as effectively. No more High Voltage DDR3 RAM for me. In the method of RMAing and hope trying to get Corsair to Downgrade at my expense. Intel recommends not making use of higher than 1.65v since it may well harm the IMC, keyword is may possibly. I don't like the further heat anyway. Will adhere to up following RMA. Manufacturer Response:Based on what you have posted, it sounds as if your motherboard may possibly be the culprit. Our memory is assured to hit the rated frequency and timings at 1.65v. Please contact Technical Support again and also your MOBO manfufacturer if the RMA does not resolve this.External Link(s): Corsair Make contact with Page|

Comment:
Excellent speeds and overclock capabilitySolid heatsinkCost None that I can locate.. The only problem I had with this obtain was newegg itself. It took more than 2 weeks to receive this item which has often been a problem for me with this website. I tend to go elsewhere because of this purpose lately. Unless you upgrade shipping to UPS the newegg "dhl to USPS to dhl" shipping is completely horrible. 2 weeks for a package that was 3 states away is ridiculous.

Comment:
added to my other 6gb corsair ram. UNfortunatly they didnt have my 7-7-7-20 timing any longer but nonetheless performs wonderful. Never ever had a challenge with corsair. I tried essential one particular time and didnt have very good luck. Never had a dilemma with corsair xms ram. Have employed them for many years. Even use their power supplies. All thier solutions operate well!!! None as often corsair performs good. Highly recomended

Comment:
Excellent ram . . not the very best .. not the worst - - you pay for what you get -- i got 6gb for 贰 . constructed this program and anything is running smoothly as a babys bum for my mothers new Computer-ASUS M4A78T-E AM3 AMD 790GX HDMI ATX AMD Motherboard -AMD Athlon II X4 640 Propus 3.0GHz Socket AM3 95W Quad-Core Desktop Processor ADX640WFGMBOX63880861 none .. in fact i coulda gone with 4gb and no 1 would be the wiser

Comment:
nicely packaged. will not run at rated speed in Asus p6x58d-e with 2 sets for 12 gig. Commonly finds only 8 gig at 1066. decreased to 3x3 and foun d only 4 gig ! Sticks passed memtest. Let's face it the x58 IMC chipset is not Intel's finest hour - so it could be the chipset which is why I gave this ram 3 eggs rather then 1. I also come across several psts that 6 sticks will not perform with this chipset-particularly at 1600. Nice job Intel.

Comment:
Inexpensive Ɩ GB for ๊), no concerns with this set or in past with other RAM from Corsair None that I can think of I grabbed 6 GB Ɠ x 2GB) off Newegg.com mainly because the price had dropped down to about ๖, then one more five dollars, and there was a ten% off RAM deal. Overall, I paid ๊ bucks for 6 gigs so I was fairly content. When I purchased the original 6 gigs for my machine, I paid 贶. But, this ram is definitely worth the income. Now running 12 gigs in an EVGA X58 Mobo with Win 7 64-bit Pro and it's a beautiful point. I didn't actually will need the ram, but it's nice to have. 6 sticks total, not one particular with a issue so far, so that's a good victory in itself. I would suggest this RAM to buddies.

Comment:
* Runs superbly at rated 񢃀) speed and under rated speed. Didn't attempt to over-clock it yet.* Detected really rapidly at initial time in my Asus Sabertooth x58. None.. This is a very dependable ram so far for me.

Comment:
Functions wonderful on an x58a-ud3r. No hassles, no worries. None

Comment:
All I ever acquire is Corsair RAM and I've in no way had to send a stick back. They always function as they are supposed to. Absolutely nothing.

Comment:
Thumbs up to Corsair RMA department! I have an intermittent problem with my sticks (now 56 days old), where one particular stick occasionally fails through boot. Corsair has agreed to RMA. The sticks would pass a Memtest, when the work. But occasionally I would have to boot much more than when to get them operating. Other occasions, they worked flawlessly. It was very tricky to troubleshoot memory that works 90% of the time. Was a great price from Newegg, but I'm outside their 30 day return policy. Corsair RMA department is good.

Comment:
blazing quickly and effortlessly overclocked. this is like a breath of fresh air. at about half the cost of corsairs DOMINATOR series, im obtaining the exact same results! nada

Comment:
I had been utilizing a similiar set (same UPC) from when I 1st built my i7 technique and wanted to go to 12GB. I was putting it off but I fear they will not make the ram when Intels subsequent platform comes out with Quad channel RAM. None

Comment:
Market common often works with any machine. NOT Cost-free! Just works!

Comment:
DDR3 Appears to be obtaining more pricey, so I went with these instead of the DOMINATORs. They run just as fine, had difficulties taking them to spec @ 1600 9-9-9-24. Had to manually set it in bios, as it initially posted @ 1066, but thats standard for Core i7. None A lot smaller than other ram with large heat spreaders. It's a pro to me but wont matter to most.

Comment:
This stuff is wonderful. I've overclocked it, and it basically eats every thing I've thrown at it with Windows 7 64bit. None at all.

Comment:
fast,stable,runs oc'ed effectively all stick working none i like it

Comment:
Exceptional performance for the cost. Incredibly compatible with my technique. (system specs listed below) With this configuration I was in a position to render a 2 1ǘ hour HD video utilizing Sony Vegas in under 1 1ǘ hours. Extremely pleasing going from a Pentium D machine with 2 GB DDR2 memory rendering in 24 - 36 hours. This RAM performed very nicely for me. None so far. System Specs:i7 950Rampage II Gene MB6 GB Corsair XMS3 RAMMSI 5770 1GB DDR5 VRAM

Comment:
Employed this for my initial develop entirely from scratch and was compatible on initial startup. Fantastic amount of RAM for the cost, no difficulties. None Program:GIGABYTE Ga-X58-USB3 MotherboardIntel Core i7-950 Bloomfield 3.06 GHz ProcessorCORSAIR XMS3 6GB Ɠ x 2GB) DDR3 RAMCORSAIR HX Series CMPSU-650HX 650W Power SupplyEVGA GeForce GTX 460 Video CardSeagate Barracuda 1TB 7200 RMP Challenging DriveSAMSUNG SATA Blu-ray DriveLinkworld ATX Case

Comment:
they work perfectly no dead stick. quickly and stable. just what i needed for the rig. havent discovered any number of programs that can even tax 12gb of this stuff its impressive. makes editing a snap and convertions are def a lot quicker. great stuff overall! had to adjust frequency in bios to get to desired mmmm tasty

Comment:
They worked the 1st time. That's all we ask for. None

Comment:
Looks cool Trigger of this memory, I changed the two Gigabyte x58a-ud3r motherboard and 2 ASUS P6x58D-E motherboard. I bought Another brand memory nowadays, guess what? Working best. If you would like I7 XX cpu DO touch it.

Comment:
Functions. None. I put a set of these into an i7 920 program OC'd to about 3.5GHz. The RAM at that speed runs in excess of 1800, and nonetheless manages to be stable. I'm new to i7s and their onboard memory controllers, so I'm not sure if this is normal or not, but it seems to be operating really nicely. No problems so far.

Comment:
Very overclockable. I got mine operating at a stable 1800 at rated timings and will push further in the close to future. None. You need to make changes in bios to achieve rated speeds.