Masscool / Soccket 478 / Intel Pentium 4/Celeron up to 3.4GHz / Ball Bearing / Copper Core / CPU Cooling Fan
52%
13%
3%
3%
5%
|
P4 User Rating: Review Date: 04/26/10 |
Easy install but a bit noisy - still a good value
|
lin Rating: Review Date: 04/21/10 |
Cools no better than the S457-1020 Aluminum MC
Comment:
I have a pentium 4 3GHz. I also have temperature monitors displayed all the time since I've had a couple times of overheating due to dryed up heat sink compound. I originally had the $8.99 S457-1020 Masscool Aluminum heat sink and fan. Due to the fan breaking (my fault) I decided to get this super-whammy copper sink model. Don't bother!!! My temps did not change even 1 degree. No difference. Nada. Nilch. Zippo. It was a waste of money. Just get the basic 8.99 aluminum model. |
Craw Rating: Review Date: 04/19/10 |
Works Fine
Comment:
ordered this as a replacement works great just a little loud |
hebintn Rating: Review Date: 04/09/10 |
Does the job
Comment:
So far so good. It's quiet and seem to work fine. Took all of 5 minutes to replace the old fan an I'm no tech-no-geek. |
Dallas Rating: Review Date: 04/06/10 |
glad I picked this one
Comment:
I looked at more expensive cooling fans but I am glad I chose this one, snapped right in places and it's very quite and runs cooler than the original fan, fast and prompt delivery |
agb Rating: Review Date: 04/04/10 |
Nice CPU cooler
Comment:
replaced a stock cooler that came with the system - dropped temps by 5 C - good value for the price |
CP Rating: Review Date: 03/21/10 |
Great Replacement
Comment:
Replaced an old HP CPU fan with this one for a friend's PC and it works fine |
Vernec Rating: Review Date: 03/20/10 |
It works
Comment:
Bought the same item 5 years ago. The fan started to slow down last mongth so I bought same thing as replacement. (not much choice for my old PC and this seemed best value). On-line purchase and delivery were prompt and efficient. |
ScottA Rating: Review Date: 03/18/10 |
Excellent Fan.
Comment:
My previous fan had some super glue on a fin and I thought I'd better replace it before it cost me. This fan is super quiet and very easy to install. Great value, super cool. |
MAD Rating: Review Date: 03/16/10 |
Don't buy any MASSCOOL Product
Comment:
this company can not support their product and can not answer any questions about it either will never buy another masscool product |
WS Rating: Review Date: 03/16/10 |
Great Products at good prices!
Comment:
The Thremal Gel wasn't needed - heatsink pre-greased. Installation of unit very easy in Socket 478. Brought temperature down from the low 50sC to the low 40s under normal load. The past 9 years this company has always provided good and fast service and had products to build new computers or ungrading and repairs. Thanks from Texas. WS |
JaxDavis Rating: Review Date: 03/10/10 |
Very Good
Comment:
As advertised, this fan is quiet, which is exactly why I purchased it. I'm very happy with it. I also like the fact that it came with the thermal gel already installed. It was a much easier installation than usual. |
mdk5885 Rating: Review Date: 03/03/10 |
As expected
Comment:
Product arrived and performed a expected. I have always had good experiences making my purchases through you over the last several years. |
Ray Rating: Review Date: 03/03/10 |
Great Product
Comment:
Works like its suppose too. |
KllrBee Rating: Review Date: 02/20/10 |
Good replacement for the original!
Comment:
Older socket 478 motherboard replacement worked great. Easy install. Keeping it cooler than the original fan that was in the pc. Much more quiet than the Zalman I had on there before. |
greggo2 Rating: Review Date: 02/18/10 |
Cool.
Comment:
Easy to install and keeps my cpu cool, that's all I need. |
gvgriffin Rating: Review Date: 02/15/10 |
Great buy for an old pc
Comment:
Older socket 478 motherboard replacement worked great. Easy install. Keeping it cooler than the original fan that was in the pc. |
Whiteh2o Rating: Review Date: 02/11/10 |
Fits Like a Glove
Comment:
Installed in no time. No problems at all. Very good product for an aging PC. |
Francois Rating: Review Date: 02/10/10 |
Iso 9000 my butt
Comment:
Just needed the fan. Copper finned heat sink was damaged both sides bent to middle. Box was undamaged as well as shipping box - so assume disgruntled employee slammed it a couple of times before packaging it. No more purchases from the company who wasted their money on the Iso 9000 BS. |
riverguy Rating: Review Date: 02/05/10 |
Nice and easy
Comment:
I just needed the fan, had to buy the assembly. Still a good deal for what you get. Cpu cool as a cucumber now. |
Beadazzle Rating: Review Date: 01/30/10 |
Great Deal
Comment:
I bought this for my husbands birthday and he is extremely happy with this product. I always buy from your company,because they have such good prices and good quality products and i've never had to return anything. |
CAS Rating: Review Date: 01/25/10 |
Exactly what I needed!
Comment:
Easy to install and works perfectly to cool my CPU. |
Bobby Rating: Review Date: 01/21/10 |
Masscool CPU Cooler Waist Of Money
Comment:
I puchased this cpu cooler for my socket 478 cpu and it didn't last more than a month. So I just bought another different cpu cooler. Not worth the hassle to use the 1 year replacement plan big hassle trying too get an RMA number for a replacement. Sevice department very poor. Won't deal with them anymore. |
Still P4... Rating: Review Date: 01/01/10 |
Good value cooler
Comment:
Not a lot of choices for the P4 anymore but TigerD had this one at a good price and it is more than adequate. Without any OC'ing it keeps me in the low 30s C under moderate load. If you need a P4 cooler don't hesitate to buy this one! |
the techy man Rating: Review Date: 12/24/09 |
great
Comment:
great heatsink, fit right into the socket, it came pregreased, you need some pressure to put in the socket and it sounds like air is going thru the case and its quiet. i would buy another if i needed it. |
This item is better then the stock cooler that came with my CPU. Installation was very easy. Bonus points go to the this product for the use of metal clips since the stock plastic clips are prone to breaking easily. Although it is noisier then I expected, I am happy that I got it.