Ultra ULT40124 Thermal Gel
33%
7%
7%
4%
7%
|
roycis Rating: Review Date: 01/30/10 |
Needs Better Production Quality Control
|
jusitn Rating: Review Date: 01/29/10 |
I think mine came empty......
Comment:
i bought this thinking i could use it for many applications but i could barley get enough out for 1 job would recommend a tube or syringe type |
Doc Rating: Review Date: 01/29/10 |
very well pleased
Comment:
Could not ask for any thing better and easy to apply. THANKS, |
bonjohnny Rating: Review Date: 01/27/10 |
Good Product
Comment:
This is a better quality paste than most. But for the value its not. There was hardly any in the bottle. Enough for barely one application. The lame brush wont reach the bottom of the bottle where all the paste was. Either cut the price or fill the bottle. |
leatherneck Rating: Review Date: 01/27/10 |
good quality grease
Comment:
I purchase a heatsink with my cpu and the grease that came with it was a bit runny and thin. This grease is definitely a better product it is thick and sticky staying where you put it. only gave it 4 stars on the features because The applicator brush was a little lame but I made it work. |
Brian Rating: Review Date: 01/14/10 |
never had a problem
Comment:
ive been using this in my system build (and rebuilds) for the last few years. i have never had a problem with its use, or the amount. 1 bottle last a long damn time. i also have seen temp decrease by -10 c! you morons using it must not have a clue what your doing |
Stephen Rating: Review Date: 01/13/10 |
Wheres The Gel???
Comment:
I am not only shocked at the tiny size of this bottle,I am also very displeased that there is a tinyamount of gel stuck to the brush and thats it!$12.00 for this empty bottle of dried up gel? Very displeased with this purchase. I feel like I've been jerked around. |
Anonymous Rating: Review Date: 01/12/10 |
DO NOT BUY THIS
Comment:
This is the the absolute worst thermal compound I have ever used. It comes in a pretty little bottle, which is alot smaller than you would think. Mine came completely full, but you could give me a gallon of this and I wouldn't use it. I had major heat problems with two different heatsinks. The v8 was idling in the 50s with a q6700 stock. Changed the compound and temps dropped to the low 30s. This stuff is worse than putting cardboard in its place. |
OC kid Rating: Review Date: 01/11/10 |
HALF FULL OR HALF EMPTY?
Comment:
um, the container is kinda empty. could have had more paste for 12 bucks! should be 7 bucks. the container without the cap is about .7 inches tall. but it gets the job done, and I've put this stuff on 2 CPU's and there is still enough for more! transfers heat well (could be my direct contact heatpipe fan) too. buy it. there is more control with this than squeezing a tube. |
Minguswaits Rating: Review Date: 01/06/10 |
Can't really tell
Comment:
It's paste, not gel. Sucks to try to get out of the container and onto the CPU. It works though. Probably could have gotten the same performance with the gel that came with the CPU though |
TechHead Rating: Review Date: 01/04/10 |
good for the price
Comment:
better than stock thermal paste on stock i7 920 heatsink. gets the job done |
punkin Rating: Review Date: 01/04/10 |
Worked alright
Comment:
This product worked better than some, but worse than others. My only major complaint was the amount per price. |
pat Rating: Review Date: 12/30/09 |
good stuff
Comment:
very good application |
LBM Rating: Review Date: 12/28/09 |
Extra Grease
Comment:
Didn't need this. The Vantec Aeroflow FX92 provided what was needed. Thanks anyway. |
Thrasher1016 Rating: Review Date: 12/15/09 |
Works fine
Comment:
Good product. Could have been more full, as others said. |
Bogeyman Rating: Review Date: 12/13/09 |
It's OK
Comment:
the processor came with its own gel package, if I knew that... but bought it then used it, applied OK, it better works, I expect more for $12 |
murphmike Rating: Review Date: 12/10/09 |
Good Product
Comment:
Good product. Good price. I really like the container - dispenser. |
Al Rating: Review Date: 12/07/09 |
Product works OK but is not so easy to use
Comment:
The thermal grease itself meets expectations, but packaging of the grease in a bottle with brush is not nearly as convenient to use as thermal grease packed in injection viles I have used in the past |
bigd Rating: Review Date: 12/04/09 |
does the job i guess
Comment:
does what it is ment to do. just maybe a quarter of a bottle is filled,and brush is sloppy. but hey it works |
Don Rating: Review Date: 11/22/09 |
Paste is paste
Comment:
Somewhat overpriced and takes a bit to get used to this goo (not Gel) |
Gifter Rating: Review Date: 11/21/09 |
Where's the ...?
Comment:
This product arrived in a thick glass container with an applicator brush, both of superior quality. The problem however is that the bottle is practically empty! A 2-3 mm layer of grease at the bottom of the bottle is well hidden by the firmly applied label. At $15 a bottle I'd guess 5 sparing (CPU) applications per bottle. I cannot recommend this product for that reason. |
Hucklebuck Rating: Review Date: 11/19/09 |
It works
Comment:
Thermal grease is grease, hard to work with and unable to test it against other comparable products. I dont know if it works any better than any other. |
Dan Rating: Review Date: 11/06/09 |
Better production Techniques Needed at Ultra
Comment:
Bought two bottles - I build computers. One bottle almost half as full as the other. Both brushes were curled as if they had been standing on end. I ended up using an oil painting brush. Product is lumpy, semi dry. Needs thinning with something that doesn't dry out. (Short shelf life?) Worked fine, great concept with bottle and brush. Brush half as long as it needs to be. Spread super thin with a credit card. All in all, if they make corrections I'll buy. But right now Artic Silver 5 beats then 10 to 1. Way too much work to be sure your CPU is protected. |
stocks Rating: Review Date: 11/05/09 |
messy at first
Comment:
The brush idea doesn't work well I found unless you twist the brush while pulling it out of the bottle. The gel is easy to work with and covers smoothly. Wish they would go to a solid soft tip instead of a brush, but the brush isn't the end of the world. I would recommend this porduct |
DOUG Rating: Review Date: 11/03/09 |
where is it??
Comment:
I got the bottle but had to turn it upside down to get the brush into it and there might have been 4 brushes full. did the job for one puter very lightly applied. brush was clunky and caused lumps. didn't much care for it. |
Bottle content was less than half and difficult to get out of the bottle with brush. The gel itself is very good. Some quality control on production would make an excellent product.