General Information |
Manufacturer: | Cisco Systems, Inc
|
Manufacturer Part Number: | CISCO2811-AC-IP
|
Manufacturer Website Address: | www.cisco.com
|
Brand Name: | Cisco
|
Product Series: | 2800
|
Product Name: | 2811 Router with Inline Power
|
Product Type: | Integrated Services Router
|
Interfaces/Ports |
Number of Ports: | 2
|
Fast Ethernet Port: | Yes
|
Interfaces/Ports: | 2 x RJ-45 10/100Base-TX LAN, 1 x Console Management, 1 x Auxiliary Management, 2 x USB
|
I/O Expansions |
Number of Expansion Slots: | 9
|
Expansion Slots: | (2 Total) AIM, (4 Total) Expansion Slot, (1 Total) NME, (2 Total) PVDM
|
Management & Protocols |
Management: | Cisco Router and Security Device Manager (SDM) Simple Network Management Protocol (SNMP)
|
Protocols: | TCP/IP, SNMP
|
Memory |
Standard Memory: | 256 MB
|
Maximum Memory: | 760 MB
|
Memory Technology: | DRAM
|
Flash Memory: | 64 MB
|
Software |
Operating System: | Cisco 2800 IOS IP BASE
|
Power Description |
Input Voltage: | 110 V AC, 220 V AC
|
Input Voltage Range: | 100 V AC to 240 V AC
|
Input Current: | 4 A @ 110 V AC, 2 A @ 230 V AC
|
Frequency: | 50 Hz or 60 Hz
|
Power Consumption: | 160 W Maximum
|
Environmental Conditions |
Temperature: | 32°F (0°C) to 104°F (40°C) Operating, -4°F (-20°C) to 149°F (65°C) Non-operating
|
Humidity: | 5% to 95% Non-condensing Operating
|
Physical Characteristics |
Compatible Rack Unit: | 1U
|
Form Factor: | Rack-mountable, Wall-mountable
|
Dimensions: | 44.45 mm Height x 438 mm Width x 417 mm Depth
|
Miscellaneous |
Package Contents: | 2811 Router Cisco 2800 IOS IP BASE Device manager for routers (ROUTER-SDM) 256MB DDR DRAM Memory factory default for the Cisco 2800 (MEM2800-256D-INC) 64MB CF default for Cisco 2800 Series (MEM2800-64CF-INC) Blank WAN Interface Card Panel (WIC-BLANK-PANEL) Cisco 2800 and 3800 Series Blank network module panel (NM-28/38BLNK-PANEL) Cisco 2811 AC/IP power supply (PWR-2811-AC-IP) Power Cord, 110V (CAB-AC) RJ-45-to-DB-9 console cable and RJ-45-to-DB-25 modem cable for management acces One pair of rack-mount brackets with screws for 19-inch racks Cisco product registration card Cisco 2800 Series Regulatory Compliance and Safety Information document Cisco Router and Security Device Manager (SDM) Quick Start Guide document Cisco 2800 Series Integrated Services Routers Quick Start Guide
|
Additional Information: | With the Cisco IOS Software Advanced Security feature set, the Cisco 2811 provides a robust array of common security features such as a Cisco IOS Software Firewall, intrusion prevention, IPsec VPN, Secure Shell (SSH) Protocol Version 2.0, and Simple Network Management Protocol (SNMPv3) in one secure solution set Cisco CME is an optional solution embedded in Cisco IOS Software that provides call processing for Cisco IP phones Optional integrated power supply for distribution of Power over Ethernet (PoE) AC-IP input surge current: 50A maximum, one cycle (-48V power included) Power dissipation-AC without IP phone support: 170W (580 BTU/hr) Power dissipation-AC with IP phone support-system only: 210W (717 BTU/hr) Power dissipation-AC with IP phone support-IP phones: 160W (546 BTU/hr) Interface Card Slots: Each slot can support HWIC, WIC, VIC, or VWIC type modules RPS: External only, connector for RPS provided by default Operation Altitude (derate 1.5°C per 1000 ft): 27.5°C @ 15 kft 35°C @ 3km/10 kft 40°C @ sea level
|
System Requirements: | Minimum Cisco IOS Software release: 12.3(8)T
|
Certifications & Standards: | IEEE 802.3: 10BASE-T IEEE 802.3u: 100BASE-TX IEEE 802.3af: Power-over-Ethernet USB 1.1 Safety: UL 60950 CAN/CSA C22.2 No. 60950 IEC 60950 EN 60950-1 AS/NZS 60950 Immunity: EN300386 EN55024/CISPR24 EN50082-1 EN61000-6-2 EMC: FCC Part 15 ICES-003 Class A EN55022 Class A CISPR22 Class A AS/NZS 3548 Class A VCCI Class A EN 300386 EN61000-3-3 EN61000-3-2 TELCOM: Interfaces comply with FCC Part 68, CS-03, JATE Technical Conditions, European Directive 99/5/EC and relevant TBR's
|
Warranty |
Standard Warranty: | 90 Day Limited
|