CORSAIR CWCH60 Hydro Series H60 High Performance Liquid CPU Cooler

Comment:
Overall it work well, of course it depend of the fan that you using...

Comment:
I actually used this product to cool something else, other than my 2500k CPU. The temp drop  was from 44 to 33 Idle, and 75 to 60 100% load. The greatest change was the noise. Before, it sounded like I had half of a jet engine in my case, and now it's much MUCH quieter.Corsair also has a great reputation for durability/customer service and all that jazz, looking forward to using this product.

Comment:
Ive worked with a few of these now for various builds, and they are a breeze to install. Personally for my own builds I think its worth it to pay a bit more for the H100 if your case can handle it, but if you just want a nice moderate yet stable overclock, this is a great choice. Always had good results from Corsair, and their service is excellent if you did ever have a problem.

Comment:
Installs relatively effortless. Operating at 32C on i5 2500 cpu with push fan only. Stock Corsair fan is pretty quiet. Corsair could present much better documentation. You'll have to go to their website if you wan't more than images. I like it.

Comment:
Simple Install, Cheap & Did I mention Really? Ought to include things like 2nd Fan and / or added screws to connect to 2nd fan.

Comment:
Got this to cool my AMD FX 8150. It is really no enough (even in a push/pull configuration). So I installed it on a i5 (unlocked) setup and work perfectly. (1GHZ overclock, bump in voltage and still rock solid at 50c).

Comment:
The pump turned out to have too much of a top margin to mount it in the client's case. Had to mount it on the top of the case and work around it. Seems to function very efficiently while overclocking a modest 4.0 on a i5 2500k. Would buy again, but with a different case. ;)

Comment:
Was able to overclock my CPU 1.06 GHz while keeping it a lower temperature than the stock cooler when pushing it to 100% across all cores. The fact that it pushed all the heat outside of the case, means the internal temperature of the case is better for keeping chipsets and other components cool. Only tricky part of the installation is getting the screws through the case, and the fan to screw into the radiator, it would be nice to have a friend to help hold pieces in place while you do it, but you can manage it on your own.Very happy with this cooler for overclocking, liked it enought to perhaps try the H100 next time to see how much higher I can push the overclocking.

Comment:
Easy to install with everything you need included. Would be nice if they included instructions for removing stock heatsinks.

Comment:
Ease of installation. Smaller footprint, keeps CPU extrememly cool. Solid construction. Fits perfectly on my Asus Sabertooth P67 motherboard None so far I adore this unit and would highly advocate to any person

Comment:
Looks Good in caseVery low profileeasy to installcools fantasticidol temp of my 2600k is ~ 29c and 49 under full load. What else do you want for 贄? None

Comment:
Corsair got my replacement unit to me lastly. They had to ship an completely new unit to me as they didn't have any spare parts (all I needed was a single of the double-sided screws.) Installation was a breeze and it looks excellent in my case. The unit keeps my 2500K cool at about 40 °C idle/ 60 °C load at 4.2 GHz and is really quiet. I'd absolutely advise this to any individual wanting to try liquid cooling. I've completed many liquid cooled systems and the ease of this system is a large plus. It's totally noob friendly so if you can install a system fan and a heatsink (block in this case) you need to have no problems. Wasn't free It would be good if the radiator could just clamp onto the fan instead of having to run a screw by means of both of them. In fact two sets of clamps would make it actually easy to set up a push/pull system with a fan on every side.

Comment:
I purchased this in Apr/11 for $60 and it has been keeping my AMD Phenom II X6 1090T at a cool temperature, which is good as I do alot of gaming. The installation to the processor was easy and this being my first liquid cool device, overall it has been a good buy. I definately recommend this as a cooling option.

Comment:
I bought this after my Coolit Eco failed and leaked all over my computer, despite being made by Coolit I decided to give this Corsair a go. So far it does seem to have better build quality so hopefully it lasts. I did have a issue installing it onto my Maximus 775 board, the indents on the block were too tight to line up with the mounting posts. It installed fine into my 1155 machine. Seems to perform great so far, I just hope it doesn't meet the same fate as my Eco.

Comment:
Simple to install, solidly-built.Wish the hoses had been a little more flexible. Ought to consist of a second set of those long screws for installing a 2nd fan. I am going to have to attempt and match them up at a hardware store. A sticker to put on the front of my case would have been good.My motherboard has two 3-pin fan headers, one labeled Method and the other labeled CPU. I put the fan on the 1 labeled CPU as the instructions indicated and connected the pump to the one labeled Technique. I kept getting a Program FAN FAILURE message at boot. So I had to use a molex adapter to connect the pump and connect a spare fan to that header to get rid of the message. I guess my board didn't like the return signal from the pump and interpreted it as a fan failure.

Comment:
over all it is a good product loved the fact that it came the next day but since it is christmas day not much i can do hope it dont take long for rma.will see when i get the next one.

Comment:
Was running at 40C idle temps stock speed on my 1100T. Installed this cooler and now my idle speed while overclocked is only 25C. I am very impressed!!!

Comment:
From what I can see it is keeping my system really cool and was super easy to install

Comment:
All in all a great cooler, a PM wouldn't make the price too shabby either. Just do some research. I would recommend this if you were looking for some great cooling and some eyecandy for the case. This isn't going to be replaced for a while.

Comment:
I was surprised at how quite this unit is, maybe I got lucky seeing as how other ppl complain abt pump noise. I can't hear any pump noise even with my ear close to it on open test bed.I plugged the pump into the Chassis fan 2 connector on mobo. I know they recommend to plug into PS molex but I have no issues.Cooling performance is amazing for such a small unit, I was thinking it would be worst than a TRUE.My CPU Idles at 28-33 depending on core and prime-95 load reaches 53-56 which is amazing by my books especially cuz I'm using a quieter and lower RPM fan than the Corsair. This was on open testbed.Rig:I7 2600K stock with ht and turbo on (3.8ghz turbo)Asus Maximus Rog mATX8gb Gskill ram6870PC V354 case (will update  soon with temps inside case I guess)

Comment:
Installation was fairly easy for X4 955. Idle temps dropped by 5'C

Comment:
it has been great for me, i am just a little annoyed with the liquid cooling... because its like sucking water, but overall good buy, would recommend

Comment:
It brought my temps down 20 degrees Celsius compared to my Cooler Master V8. I was able to overclock my i7-920 to four GHz with temps reaching 80-85 degrees Celsius tops. At three.2 GHz, temps didn't go above 70 degrees Celsius.It is quiet, in particular compared to my GPU fan and other case fans. The tubes are not very bendable and make installation a small tough. The way the CPU block installs, you will have to take your motherboard out of the case if you do not have a case that has a hole where the CPU is on the back. There were no screws provided to add a second fan onto the radiator. Antec 900Intel Core i7-920 @ 4GHzASUS P6T Deluxe V2 Motherboard12GB Corsair Dominator DDR3 RAM @ 1600 MHz 8-8-8-24EVGA GTX 580 Black Ops EditionOCZ Vertex 30GB SSDOCZ Agility 60GB SSD2 x 640GB WD Black 7200 RPM Hard Drives (RAID 1)

Comment:
really good cpu cooler , i would recommand it to anyone that wants low temps or that plan on overclocking

Comment:
Core temp I5 2500k z stock clock 30c idle, 48c full load (running prime for 10 minutes), room temp 21c. Overall happy with H60 and have it set up in a push/pull config.