G.SKILL 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1100 (PC2 8800) Dual Channel Kit Desktop Memory

Comment:
Run extremely cool. Booted correct up. None so far. Good looking heatsinks. These run far cooler than the Critical 1066 Tracers they replaced in my system. Why they can run at 1.8v alternatively of the Essential two.2v I do not know, but it is great, and I am hoping for a much better encounter than I had with the Tracers Ɩ of eight sticks sooner or later went undesirable).

Comment:
1099mhz @ 1.8v memtest passed 4 hours. Appears rock solid. At these low voltages I assume the ram will final for a extended time. none

Comment:
Not a terrible cost thinking about the latency for DDR2 1100 RAM. This stuff worked fine in my Gigabyte EP45-UD3P board. I had to manually adjust the latency to 5-5-5-15, but that's not also out of the ordinary. Running now at 1120mhz at these latencies and I in all probability have space for a lot more. No issues at all. Good stuff! The heatsinks are a bit tall, so make certain you have area. That kinda gets in the way when you're operating in a tight case and trying to route cables, but it's actually a really minor quibble. Never ever had a issue with G.Ability.

Comment:
I purchased this kit to replace my G.Ability HZ modules that finally died. I have them operating at 1141MHz at only 1.94v completely stable! The timings that have been recognized by the BIOS are truly a bit tighter than my old HZ's (in regards to the 2nd and 3rd sets of timings in my BIOS). To get my HZ's to 1081MHz I had to use 2.3v and manually tweak the 2nd and 3rd sets of timings. This kit is probably the ideal replacement I could have found for my HZ's and the value is great for the performance. Totally NONE! I had initially picked up the PI kit that runs at 1066 and they have been lousy. I couldnt get them to POST at 1081MHz making use of considerably higher voltage. Honestly, spring for this kit and you will not be disappointed.

Comment:
it is alot of memory and was looking forward to the added speed and amout of ram more than my stock stuff I can't get it to run at firms reported specs. I been at it for a some time and no go stays at 1066 everytime I step it up to specs program won't run and goes back to 1066 immediately after a couple of restarts. What am I missing right here. mobo Gigabyte ga-x38-dq6, E6850 cpu, Vista Property Prem 64bit

Comment:
Overclocks to 1200 at 1.9V !!!! with five-five-five-15 instances Runs Cool, looks excellent. upgrading from 800 mhz RAM truly makes a difference. none, as far as the product goes. Not the memorys fault, but Newegg's shipping was rediculous for this order. Orderd Sunday night, shipping invoice is received monday afternoon, tracking number received on TUESDAY, the CPU coller I orderd with this came friday, and the memory came the following Wednesday. Newegg, please invest in a Canadian warehouse....

Comment:
Rapidly, properly crafted ram with lots of possible. Due to bios limitations on many Gigabyte boards, you have to make a handful of tweaks in order to make the ram run devoid of errors. I'm personally still new to more than-clocking, so I had to put more time into this than some other people would. But it also annoyed me that following all of my work, there appeared to be no true raise in overall performance. I only marked it down 1 egg due to the finish result. Than once more, there's not that substantially of a speed distinction amongst where it was and where it was supposed to be. But to me, every single little bit counts. Manufacturer Response:.Dear BuyerThank you for your G.Skill buy and assessment. The memory package you purchased is not a typical memory frequency, so CPU overclocking will be essential. Also, it is above the maximum default regular, so memory settings should be manually configured. Once that is full, almost everything should run just fine. Based on what your original memory was, the distinction might not appear a lot below normal operation, but if you run benchmark tests, games, memory intensive programs, you will certainly notice a difference.Thank youGSKILL SupportExcellent and consumer service are our best priorities.Tech Assistance E mail: ustech@gskillusa.comRMA Dept E-mail: rma@gskillusa.comG.Skill Forum: http://www.gskill.us/forum/

Comment:
Runs somewhat cool, rock stable at 1187 MHz at five-five-5-15, if you loosen the timing a bit can run at 1280 MHz on GA-EP45-UD3R. Running mine at two.1 V with minimal heat achieve. Not only appear cool, run cool and can match very easily in side by side config, (some heat spreaders make this challenging, these don't). Verify them out at 1100 MHz and ran at four-4-four-14 at 1.8V. A bit high priced compared to other ram sets out there now. My initial G.Ability set, had applied Kingston and Corsair for stability in the previous. This set exceeded my expectationsComp set up: E8500 operating at 3.54 GHz, GA-EP45-UD3R MB, 4GB G.Skill one hundred MHZ ram, EVGA 9800 GTX+, X3 600 watt PSU, Freezer 7 pro Rev2. cooler, Antec P182 SE situation. New build 10-15-09

Comment:
functioning fine a bit off of manufactures spec. see other thoughts umm, yeah, uhh on a gigabyte GA-ep45-UD3R, the board doesn't like the bus speed they are speced at, so i have them at 1066. that aside they perform wonderful

Comment:
Worked at specification nearly from initially boot on a Maximus II Formula MB. Running at 1112 with a speedy selection in BIOS, at 1.95 V. (just to be protected). RAM sinks are comparatively cool to the touch, and passed Memtest with flying colors. Booted and loaded Windows Vista 64 with both sticks set up, and NO troubles. (BIOS 2104) The tall sinks may interfere with some CPU heatsink models, but was not an concern for me. I have not attempted to overclock these but, but I am going to try for 1200 at above two. V. This is my third set of G.Ability RAM now, and have however to have any troubles with this RAM. I will continue to obtain G.Ability for future builds.

Comment:
My over-clocked technique is now genuinely stable thanks to superior memory with more "headroom." Operates completely with my ASUS P5KPL-AM EPU mobo and Core2Quad 9505. Correct now on air cooling my CPU is at 3.35Ghz, FSB at 1574Mhz, and memory about 950Mhz. These memory sticks are crazy, some thing out of Star Trek. Anyway, right after 9hrs or Prime95 my highest core temp was 67c on core 1 (rated up to 100c). Im using the Dynatron K987 CPU cooler FYI. 贄 for 4gigs, but you can't place a cost on stability and efficiency truly. The heat sinks make these modules extremely tall.

Comment:
I've got 8GB of sticks operating at 1066 at five-five-five-15 and 1.8v and every little thing is right on the dollars. None. I commonly order just a smidge higher with respect to specs than I actually need to have so that my method has some wiggle space, which is why I'm running 1100 modules at 1066.

Comment:
Cheap but high excellent memory. Operating at 1125MHz on a Gigabyte GA-EX38-DS4 board. Permitted me to overclock a Q9400 a bit additional than with Corsair Dominator PC8500 memory. None. Obtain some now prior to DDR3 completely takes more than and drives the price tag of DDR2 up.

Comment:
it run at 1100 at 5 5 5 15 timer low volts incredibly nice look to them and extremely excellent running temps so can overclocking but it is a small difficult to but it can be done i have 8gig of this running at 1100 and volts are two. the con is that i had to turn my volts. if i have it at 1.9 and run memtestpro for 3 hour i have about 28 error CPU::AMD Phenom II X4 965 Black Edition Deneb four.0GHz,125wMotherboard::ASUSTeK Computer INC, M4A79 DeluxeMemory::G.Ability 4GB ƒ x 2GB) 240-Pin DDR2 SDRAM DDR2 1100 (PC2 8800) X2 Graphics Card::NVIDIA GeForce GTX 285,EVGACooling::cpu cooler, i produced a water cooler for the cpuCase::Antec Nine Hundred Two Black Steel ATX Mid TowerPower Provide:wChallenging Drive::WDC WD6401AALS-00L3B2 ATA DeviceOperating Technique::Windows 7 Ultimate 64bitMouse:logitech G5Keyboard::logitech G15 Manufacturer Response:.Dear ConsumerThank you for your G.Ability obtain and review. Based on your motherboard, the actual voltage may well be slightly various than the voltage set. The motherboard may possibly have been setting a slightly lower voltage than the memory required. Glad to hear every little thing is operating just fine now. If you have any further concerns or issues, please really feel no cost to make contact with us and we will be glad to help you. Thank youGSKILL HelpHigh quality and buyer service are our top rated priorities.Tech Assistance Email: ustech@gskillusa.comRMA Dept Email: rma@gskillusa.comG.Ability Forum: http://www.gskill.us/forum/

Comment:
Works as promised. Running fine at 1100MHz on EP45-UD3P/Q9550. Can't seem to get it stable at 1200MHz but not confident if that's the memory's fault or my own. GSkill appears to be pretty very good. Just ordered a set of their DDR3 1333MHz sticks for my Intel board, hope it operates out the similar.

Comment:
Quite Very Rapid have mine OCed to 1230 stable have a Q6600 OCed to 3.30 on Air Cooled None Just Buy it your wont regret it

Comment:
Fantastic memory!! Runs great on my Gigabyte GA-EP45-UD3P. None

Comment:
Awesome RAM!!! Operating at 1200mhz ʁ.95v and 5-5-five-15 timings for 9 months now devoid of a hickup. None that is can feel of. This was my first time utilizing GSKILL RAM and i am impressed!My motherboard is the gigabyte ga-ma790gp-ds4h.Shipping was rapidly as constantly. Newegg Rocks!

Comment:
Updating an older overview where I docked an Egg for needing elevated volts. Resolved the situation with G.Skill Cust service. Excellent information beneath if you are using this module with AMD CPU's.G.Skill Cust service was excellent, it took several days of emails, but they lastly assisted get my OC stable. Beneath is one particular of their emails, might be redundant information for authorities, but fantastic to know if you are a developing your initially AMD program with this RAM.A speedy summery is on a AMD Board you may possibly want to contemplate dropping to DDR2 800, and manually reduce the latency to 4 4 4 12 if overclocking. none "AMD DDR2 platforms are restricted to 1 stick per channel. Furthermore, in single channel they can operate above DDR2-800, but in dual channel, most will be limited to DDR2-800.Lowering the timings lower the amount of clock cycles to transfer bits. 1 clock cycle, is roughly the equivalent of 266Mhz. So because you were unable to operate DDR2-1066 CL5 due to too significantly stress on the memory controller (high frequency), lowering the frequency to DDR2-800 reduces the pressure but then lowers the clock cycle (faster). As a result, DDR2-1066 CL5 overall performance is really comparable to DDR2-800 CL4. Normally speaking, AMD platforms respond properly to lower latencies, so overall performance in fact becomes slightly superior with CAS Latency at four rather than a greater frequency that can result in instability as an alternative.Although you could have purchased DDR2-800, you would have had to obtain a high overall performance CL4 module to make similar outcomes. It would essentially be the similar cost as the a single you acquire

Comment:
Productive heatsink. Runs at rated speeds with advised voltages. Extremely stable on my Asus P5Q Deluxe. None as of however. the PI black series DDR2-800 looks to be the exact same RAM underclocked. perhaps save yourself a bit of money by getting it as an alternative.

Comment:
Finest ram I have ever purchased. Haven't tried to get it to 1100mhz yet have it operating at 1066mhz at five-5-five-15 timings 1.8v rock stable. Let me finely overclock my processor and ram and nonetheless boot each and every time. none Inexpensive price tag for such wonderful ram acquire it know very best ram for the price. Newegg is the very best.

Comment:
Ran straight out of the box in my method devoid of any tweaks. I was even capable to overclock it some with no troubles. None. I use this RAM in a gaming/emulation program, and it performs wonders.

Comment:
Functions at rated speeds!!!!! which is a lot more than i can say for some other brands that commence with a K and finish in ingston. I bough these sticks to run at 1066. NO difficulties. Worked excellent on the 1st attempt (set the timings 5-five-5-5-15 and set speed to 1067 in bios dont forget to set voltage @ 1.9......) Not actually a con, but mine have a unique heat spreader. At initially i thought is was the incorrect ram, but seeking closer, the PI symbol is nevertheless on the heat spreader, and the timings/speed/voltages are the identical. IMO, the newer heat spreader looks nicer. (all black with blue writing /accents. Will be sticking with this memory and 2 others that i have had no situation with. I went out on a limb shopping for something that newegg had in a bundle, worst time of my life receiving them to run at rated speeds, so RMA for refund and spent the added monies to get one thing i knew would be great.

Comment:
Fast memory that worked right out of the box. Despite the fact that I had to upped the voltage to 1.9V for it to run stable @ 1066, this is still very low for its rated speed. Soon after three failed set of Corsair Dominator 1066 2x2GB, I have completely no complaint. And by the way, the memory module look excellent with its funky heat sink. The heat sink is type of tall which is not seriously a con. Just some thing for new purchaser to be conscious. Might not fit in everything setup based on the motherboard layout and CPU cooler. My method:Biostar n750a MOBOAMD Phenom II x4 940 OC to 3.4GHz2x2GB GSkill 8800Asus GeForce 250GTS Graphic

Comment:
running at 1133 @ 1.9 v: PL 07 (tRD) in a p5Q deluxe; wonderful value ; PL 07 at this functionality tier with my rig is very excellent; this memory kit does its aspect very properly none Q9650, gskill 1100 black pi, Correct, velociraptors; wd black 640s raid , WD two TB;operating this rig at three.825 @ 1.two vcpu and two bumps on cpu pll and northbridge; PL 07; ram @ 1133 stays awesome & stable ; this perf has no added cooling on the RAM and no extra DDR voltage, with each of individuals this kit could go just below 1200 ; wouldnt do PL 06