ZEROtherm CF900 92mm CPU Cooler

Comment:
Just got it in, for any comment that said this was a sensitive fan. BAH! computers are senstive, if you can't handle a mouse then don't build a computer. Anyway this fan rocks, it's well built, solid, and gorgeous. I recommend fully. Tiger sent it super quick! Thanks Tiger!

Comment:
I used this CPU cooler for my intel Q6600. I'd idle @ 32c under a load hit about 46c (overclocked @ 2.7Ghz).. I've been very happy with it.. Look great in your case! Plus you can find replacement 92mm fans anywhere if it ever happens to go out.

Comment:
Works Great! My CPU temps are lower than I expected. And its QUIET!

Comment:
I bought this CPU cooler 2 days ago and have just started it up yesterday. It seems that it is doing its job pretty well with no problems whatsoever. It is also quiet in most cases and it cools my E8400 with a 30C(Idle) and 40-47c(load). Size isn't a matter even though if you have a small ATX motherboard or abit smaller than a mid-atx case; It would just fit in perfectly with the supports under the motherboard. I would recommend this cooler to anyone who would want an excellent price : performance ratio.

Comment:
I purchased this piece of equipment about 3 weeks ago, so far so good. It keep my computer running about 10C cooler and it's very quiet. Installing the fan was very easy. The only problem is the size, the mount is huge and I had small problems installing it as per the manufacturers directions.

Comment:
ive had no trouble with this fan its very quiet works well and looks great in my clearsided case for the price this is a great fan

Comment:
The plastic tabs broke easily and there are no replacements for them so now i have one thing from it the fan

Comment:
This fan is really quite, but peforms very poorly in comparison to intel's stock HSF, epecially for the money, I saw about 1-2 degree drop in cpu temps, very disapointed.

Comment:
The heatsink works fine,but don't forget to change the fan,because this fan is a piece of crap, don't go above 960RPM. I changed it for a old masscooler 92mm fan that goes at 4000 RPM and now I have a temp at full load of 52C and idle at 48C. Recommened but with a fan changed.

Comment:
I have only built 2 systems before and never installed this type with a metal x shaped bracket that the fan screws into on the other side of the motherboard.The instructions are adequate but with poor wording and grammar. There is a plastic x shaped film that peels off with the paper film from the metal x bracket then you have to separate the plastic film and place it back on the bracket before you install and for newbies like me it just wasnt very clear. Cpu at 38degC,seems to work well.

Comment:
My computer used to make my computer room sound like a server room with how loud the CPU fan was. I purchased this fan and now my computer is quiet as ever! I noticed a HUGE performance increase. I use Vista and it took a few minutes to restart or shut down. Now it only take a few seconds. I definitely would recommend this fan to everyone that uses a 775 socket motherboard. Easy to install, I just recommend getting an extra tube of thermal paste, the one included is not enough.

Comment:
Kind of expensive, but worth while, it keeps my core 2 duo very cool, and its really quiet.

Comment:
this is the worst buy possible

Comment:
Actually very very happy with this one. It keeps my CPU cool even though I have 2 8800GTX's running in the case. I just wish I could get these cards to stay a bit cooler.

Comment:
great buy, i bought this to keep my pd 805 2.66 cold and its better then most other hs and fans do... great product

Comment:
The heatsink looks good, works well, fits much better than most. Not too great for cooling. Using OCZ Silver (applied and reapplied until I reached the lowest temperature I could) it ran around 43C before load and in the mid 50s-60C under heavy load (Core 2 Duo E6850 @3Ghz). After overclocking the 6850 to 3.8Ghz, 50-53C before load and 60-70C under heavy load. [Never breaks 70C though - never.] Have direct-feed side vent on my case lined up perfectly with the fan: optimal airflow to CPU, case is cool (never past 32C), so this thing is responsible. Maybe my processor is just too much for it, but I'd say the fan is a bit too weak. I expected better, at least before OCing. If you want something that looks better than but only performs about as well as a stock cooler, get this.

Comment:
Very quiet. But cannot be installed properly in an ASUS P5VD2-MX SE motherboard with both RAM slots occupied. Part of the cooler extends beyond the RAM slot.

Comment:
This product is spectacular. I have found that it keeps my processor some where around 26c and with a full load about 35c but no higher I would buy this item again

Comment:
Very satified with this product. Went from: - Before Nonload - 48 - 50 C - After Nonload - 40 - 41 C - Before Load - 58 - 62 C - Before Load - 49 C Max Intel Core 2 Duo E6600 2.40GHz, Asus P5B Deluxe, OCZ Platinum Revision-4 x 2048MB, 2 x XFX GeForce 7300 GT 512MB

Comment:
no LED light. great heatsink, fan stinks. the fan will not go above 984rpms. runs my 775 socket Pentium D @ 87f-108f. my advice look at diffrent fan.

Comment:
Well, it seems to be working great, and it fit perfectly on my evga nforce 680i mb. The blue led doesn't appear to be working on mine either though, and I wonder if it supposed to even have one. I couldn't find anything on the box that said that it does. Either way, I'm satisfied with the product.

Comment:
Well,just got it in work great, but the LED don't work,that sucks, all in all good,but will replace it with one that the lights work on.That was a big part of why i got this one

Comment:
i got 4 80 mm blue led fans in a raidmax gamming case running 2 gb of ddr2 6200 low latency 2 sli 7200 video cards 512 mb each 1 gb in all this fan runs at about 45 c normAL STRESSING CLOSE TOabout 55 56 celcius cards run about 50 celcius one a degree or 2 more 2 250 gb harddrive very decentfansounblaster audigy 2 with front drive controller io panel 500 watt earth watts power suply have to up to 750 watt this week i use thre nvidia 680 i board fan says only goes 1500 rpm i adjust in bios to turn fan max up then it runs at 5273rpm jumps up and down a little that cools down about 5 more degrees Celsius i am not satisfied with this i am runnning e6600 processor dual core waiting for neew v fanless copper 775 cpu fan with blue led hoping to drop another 10 degrees or so this fan is alright but wont get much overclock with it as you dont want to exeed 60 degrees in cpu temp as house and enviroment changes are unpredictable and could run 60 one day and 80 degrees the next stay at least 55

Comment:
Impressive! excellent cooler with superior craftmanship. EVGA 122CKNF67 mobo/E6600 @ 2.8Gz/4GB ram/2-120mm case fan, 40C idle, 49C under load @ 1200 RPM!!! it is indeed very very quiet. Silence + performance = great product! i wish it came with a fan controller so i can pump up the fan speed for even better cooling.

Comment:
Ran nice and quiet (18 dBA) but watch your temp. Held my Celeron D at 51-52 idle. Speed Fan indicated too hot. So I changed out to the Thermaltake TMG i1 which keeps it at a cool 22 and 16 dBA.