SilverStone SDP08 3.5" to 2 x 2.5" Bay Converter

Comment:
Worked as developed, fit ideal. Came with screws and was affordable and solidly built. Great perform. None.

Comment:
Sturdy (decent metal construction). Accommodates 2 2.5" SDD devices, with air gap for cooling. Outer screw holes (i.e., for three.5" mounting) had been as well smaller for drive mounting pins of tool-free HD mounting sled of Cooler Master HAF 922; necessary to be bored out a touch to fit. Stamped metal construction had a couple of virtually-sharp edges. If you're prepared to bore out the screw holes in the outer frame, you can use this with no-screw (pin-based) HD mounting. And be cautious handling it until you're certain there aren't any sharp edges, or give the edges a fast swipe with emery cloth prior to employing.

Comment:
Effortless access to mounting screws: Lots of room for a screwdriver above every single screw holePrecise common hole spacing (no drill needed)Holds two two.5" drives comfortably None This was the only two.five" -> three.5" converter I could locate that had screw holes on the bottom (my situation mounts 3.5" hdds from the bottom with rubber grommets).

Comment:
Fit like a glove in my Antec 900 with two OCZ Vertex LE SSD's. Good top quality. Felt like it was made particularly for my gear. Don't know what else I can say. It's precisely what it says it is. Wish it was black. In all probability gonna paint it when I place it in my new Antec 1200. If you want to go with a SSD Raid, this is great. Drives are close together, but since they don't develop any heat, it's no problem.

Comment:
Very sturdy top quality. Fits two SSD's. None I place a Intel X25-M G2 in this and it fit perfectly. The adapter is sturdy and is representative of Silverstone top quality.

Comment:
Was capable to mount a two.5" SSD in a Dell R300 server employing this adapter. Its sturdy and it fit perfectly. None. I very first attempted utilizing an additional adapter from StarTech.com which was challenging to use due to the fact it was too modest and its holes did not match the three.5" drive enclosure. I was incredibly glad I employed the SilverStone as an alternative.

Comment:
Fast shipping free shipping Delivered next day None

Comment:
Sturdy; holds 2 drives. Had to drill wider screw holes so my HAF932 HDD mounting sleds would attach to the converters. Had to Dremmel my mounting sleds since the overall size of these converters is big (too substantially metal on both sides). Would have Dremmeled the converters if I had a spare metal bit.

Comment:
Sturdy construction and excellent craftsmanship. Sounds funny to say for a piece of metal, but you can tell that the manufacturer cared about placing out a quality product. None seriously. I mean, I guess it could be totally free. I previously had my G.Ability Titan SSD just sitting in the bottom of my case and I wanted to mount it. I knew that there had to be some sort of mounting bracket out there, and I discovered the SilverStone. I was content to uncover that it fits perfectly into my Antec Twelve Hundred situation and no problems what so ever.

Comment:
Solid and cheap Even the bottom drive does not line up the SATA for the backplane in a Mac Pro, which means it possibly won't operate for other backplane based systems either.

Comment:
Does what it says it does.. Had some difficulty screwing in the SSD but all is well now.

Comment:
mounted in my unused floopy bay in my lian-li fits great.holds two drives. none

Comment:
Does specifically what it's supposed to. Good sturdy construction. Bit pricey for a hunk of sheet metal. No issues obtaining holes to line up in both the 2.five'" or the three.five bay itself.

Comment:
Extremely simple to install. Comes with a variety of screws. Quite Sturdy. Can accomodate 2 drives. None whatsoever. A ought to for that SSD upgrade for your desktop.

Comment:
Although it is pricey, it does hold well the 2 SSD in the bracket. It fits perfectly on a 3.5 hard drive tray and fits without a itch in the computer case.

Comment:
Mounts two laptop drives -- even the incredibly thick ones I am employing -- and leaves about 3ቬ" of space among them which is fantastic for ventilation. Permits me to add RAID to my mATX HTPC.Mounts perfectly on the drive tray, leaving a tiny tiny bit of headroom at the very best, so the leading drive is not pushed correct up against the next drive tray or component. On the bottom, there are a couple of slots in the metal, and the screwholes are placed such that there is about threeኀ" of space between the converter and the tray, all of which is also good for ventilaation.Metal is somewhat thick (thicker than most case walls) and feels fairly solid to the touch i.e. does not bend easily by hand. Nickel plated against sweaty tech hands. :DActually fantastic for adding drives, specially RAID arrays, to HTPC situations with limited space or refurbishing older/cheaper pc instances that only have the normal 3 bays.have 3 ű.99 + Ū.99 shipping is not the least expensive on the internet. I've been a Newegg fan given that 2002, but the prices seem to have been edging up. Placing the screws into the drive screwholes even though mounting the drives to the converter is a tiny like threading a needle. You will require patience and a steady hand, and can anticipate to have to try a couple of instances. A magnetic screwdriver would aid.You need to really do this on a wide open flat surface exactly where you won't require to scramble to uncover dropped screws -- I did it whilst sitting in my chair at initially and had to hunt about to floor right after the initial unsuccessful try.

Comment:
Great cage, drives are secure, I have 2x 9.5mm Z height drives in there and among the bottom drive and the bay converter there is about 1-2mm of clearance, and a small far more in between the two drives Didnt contain washers factors to absorbe noise but I has lots of spares Place this in my Antec Minuet 350

Comment:
All aluminum style and extremely strong. Screws are included to mount the converter and two SSD's The screw holes had been also little for me to use my tool-less tough drive style on my COOLER MASTER ATCS 840 and I had to file a one edge off to get my hard drive mount to close correctly. If you have a little know how the modifications are no important problem

Comment:
Fantastic quality. I am incredibly impressed with how sturdy and durable it is. It does what it say's it's going to do: hold two two.5" difficult drives in a 3.5" bay. Comes with all the screws and every thing. What additional do you want from a bay converter? Don't get these affordable plastic ones or the ones that are like ฟ-ฤ or far more. This 1 is excellent. None

Comment:
Simple, totally functional, wonderful quality none This converter does precisely what I necessary it to do, place two 2.5" drives in a three.five" bay. The converter is great good quality and it comes with the screws required to mount the two.five" drives (but not to mount the converter to the bay). It leaves sufficient space for the drives to have airflow about them.When mounting the bottom drive, leave the screws loose or the tabs will bend inward and not leave sufficient space to slide the leading drive into spot.

Comment:
Affordable, holds two SSD'sI purchased this because even although my Kingston 128Gig SSD came with mounting brackets, I intended on having 2 in there, and for ten bucks this was a steal, fit perfectly in my Lian Li Armorsuit PC50R None

Comment:
Nicer, sturdier material than I expected for the value. Fits two drives nicely. Excellent for my Western Digital SSD. Looks great mounted to the HDD tray of my Cooler Master Cosmos Case. No unexpected problems with this product. Good for the price, highly advocate.

Comment:
Performs as expected. Nicely-produced chunk of sturdy metal with smoothly polished edges and a mirror finish. Will hold two 2.5" drives. None really. For what it is, it could be a little more affordable - that's the only cause I took off a star. Ok, it was a little fiddly to screw the drive in - but how typically are you going to do that? Used with an OCZ Agility Series OCZSSD2-1AGT60G 2.5" 60GB. In my case it fits into a slider tray that slides into an internal drive bay - initial time round it seemed too extended, then I realised it's not symetric length-wise - turned about the other way and it's rock strong and fits perfectly.

Comment:
I purchased this to mount a 128GB Crucial M4 SSD in my system and it worked like a charm. I figured since I was going to need to get a bracket to mount the SSD, and it was going to use up one of my 3.5" bays already, why not just get one that can hold two in case I feel like getting another in the future?All the holes lined up, the screws were all compatible and even my Cooler Master hard drive rails fit.

Comment:
Worked good to mount my new SSD drive I bought for my shuttle Computer. Came with almost everything it necessary. An affordable way to mount two SSD drives on a single three.five" slot. I can't assume of any other than those stated by earlier customers. None of the cons previously talked about by others were an concern for me. Adapter fits wonderful on my shuttle Computer internal HD bay. I am a lot more than satisfied with it, and would advise it to anyone in need to have of securing some SSD tough drives or any notebook hard drives.